Mid-volume UV flatbed printer
Piezoelectric inkjet
8-channel piezoelectric inkjet system with one 636-nozzle, variable droplet printhead per channel.
CMYKcm W/V
piezoelectric inkjet system with variable droplet printheads
Variable droplet sizes from 6 to 42 picolitres. The ability to vary the drop size to 6 picolitres produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 42 picolitres produces uniform colors. The result is near-photographic quality with sharpness only before seen at resolutions of 1,440 dpi or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode).
35
21.1
14.6
7.3
IJC255 or IJC257 UV-curable inks packed in quick-change, 800 ml / 2 litre bags in: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta. White and Varnish packed in 1 litre bags.
True flatbed for rigid media printing with available Roll Media Option for flexible media printing
308 x 250 cm (320 x N cm permitted w/308 cm vacuum)
50.8 mm
Up to: 309 x 251 cm (321 x N cm permitted w/308 cm vacuum) (for edge-to-edge printing)
Up to 34 kg/m²
90 to 220 cm, Up to 50 kg (at any width), Maximum diameter: 240 mm, Core: 3 inches (inside), Bias: Print-side-in or print-side-out, Most types (application dependent)
5 pneumatic operated pins per vaccum zone / 10 pins total
60 x 80 cm (min) to 305 x 250 cm (max)
±0.8 mm max error, measured over 2.5 m
±1.0 mm max error, measured over 3.08 m
0.7 mm max error, measured over 2.5 m
0.7 mm max error, measured over 3.08 m
1.0 mm max error, measured over 3.08 x 2.5 m
±0.6 mm max error, measured over 2.19 m
±1.5 mm max error, measured over 2.0 m
0.7 mm max error, measured over 2.19 m
2.0 mm max error, measured over 2.0 m
2.5 mm max error, measured over 2.0 m x 2.19 m
10/100/1000 Base-T
ONYX® Thrive™ 12 (421 configuration or greater recommended)
ONYX® ProductionHouse™ 12 (available, not recommended)
2 X 200-240 VAC, 50/60 Hz, Single-phase, Rated Current: 16A, Circuit Breakers: Europe: 16A, ROW: See CB Scheme Report
Clean, dry, compressed air using a Coalescing Filter, Pressure Regulator set to 690 kPa (100 psi) and 6 mm outside diameter air tubing. Peak flow: 56 l/min at 690 kPa
Temperature: 18˚ to 30˚ C
Relative humidity: 30 to 70% (non-condensing)
Ventilation: 1,200 m³ per hour minimum (see Site Preparation Guide)
2,750 m maximum, however some components specify a limit of 2,000 m
Printer only: 4.66 m x 3.83 m, 1,625 kg
Printer + Roll Media Option: 4.66 m x 4.12 m, 1,800 kg
Table height: 0.88 m / Overall height: 1.3 m
Visit our online guide to find the right media for your printer and application, including matching color profiles
Add a Roll Media Option to the printer at any time
Add a Static Suppression Kit to the printer at any time
Add an Automatic Printhead Maintenance System to the printer at any time
Adding the APMS (Automatic Printhead Maintenance System) to the printer enables quick, reliable and hands-free cleaning of a single colour in less than 25 sec or all colours in 2 to 4 min (depends on the printer version).